General Equipment
This page contains manauls datasheets etc. for some of the equipment avialable in Automation & Control Laboratories.
To see a list of special Equipment Click here
Delta Elektronika ES 030-5 Power Supply
Hameg HM 7042-5 Power Supply
3 independent DC Supply Voltages
2x0-32V, 2A; 1x2.7-5.5V, 5A
Hameg HM 7042-3 Power Supply
3 independent DC Supply Voltages
2x0-32V, 2A; 1x2.7-5.5V, 5A
POWER SUPPLY - Hewlett Packard HP E3631A triple-output
Equipped GPIB and RS-232 as standard.
All programming is done to use SCPI (Standard Commands for Programmable Instruments).
80-watt triple output supply
Three independent 0 to +6V/5A and 0 to +/-25V/1A outputs.
The 6V output is electrically isolated from the +/-25V supply
The +/-25V outputs can be set to track each other.
Danica EA-PS 7032
- Ausgangsspannung 0...32V
- Restwelligkeit < 0,3mV
- Ausgangsstrom 0...10A
- Restwelligkeit < 3,5mA
- Systemanwendungen
- Unterrichtsräume und Labors
- Transistor-Linearregler mit Thyristor-Vorregler
- Messinstrumente Klasse 2,0
- U und I extern programmierbar
- Fernfühlung (Sense)
- Abmessungen BxHxT(mm): 331x133x350
- Gewicht 14,9 kg
Fluke 289
Fluke 289 sand RMS industrielt logningsmultimeter med TrendCapture
Datasheet and User manual
- Log multiple sessions or log data continuously for over 200 hours.
- Unsure about a function? Press the “i” button for instant help.
- Live demo: 28x_demo
- fluke view forms software download (iso format)
Fluke 8050A
4 1/2 digit DMMs have the following measurement functions:DC volts, true rms AC volts, DC amps, true rms AC amps, ohms, dBm (with selectable reference impedance's) conductance, and diode test.
Fluke i30s Current Clamp
Measures Current from 5mA to 30A
1mA resolution
100mV/A output for easy conversion
Tektronix TDS 2012B
Oscilloscope, Digital, 100MHZ, 2 Channels, Color Display, USB Ports
Tektronix TDS 2004B
Oscilloscope, Digital, 60MHZ, 4 Channels, Color Display, USB Ports
Philips PM3050 2 Channel 60MHz Analogue Oscilloscope
Philips PM3315 Storage Oscilloscope, 60MHz, 2 Channel
Storage Oscilloscope, 60MHz, 2 Channel
Philips PM3320 2 Ch 200 MHz Digital Storage Oscilloscope
The PM3320 is a 200MHz bandwidth oscilloscope with a sampling rate of 250 MS/s on each channel.
4nS single shot resolution on each channel.
10 bit vertical resolution with 4K deep memories.
The time base is recurrent from 5nS/div to 5S/div.
TEKTRONIX 2211 50 MHZ DIGITAL STORAGE OSCILLOSCOPE
The 2211 Oscilloscope is a 50MHz, 2 channel digital plus analog unit which provides 20 MS/s per channel sampling. It has vertical sensitivity of 500 µV/div, 4 K per channel record length and CRT readout, including trigger level voltage. The unit comes with a RS-232-C hardcopy interface.
Philips PM5192 Synthesized Function Generator
Frequency range 0.1mHz-20MHz.
5 Selectable waveforms.
Max. output voltage: 20Vp-p.
Waveform resolution: 8 digits.
Output impedance: 50 ohm.
Agilent 33220A Arbitrary
The 33220A function generator offers 11 standard waveforms plus pulse and arbitrary waveforms - it is the most frequency stable and lowest distortion function generator in its class. Datasheet
- 20 MHz sine and square waveforms
- Ramp, triangle, noise, and DC waveforms
- Pulse generation with variable edge
- 14-bit, 50 MSa/s, 64 Kpoint arbitrary waveforms
- AM, FM, PM, FSK, and PWM modulation types
- Linear & logarithmic sweeps and burst operation modes
- Graph mode for visual verification of signal settings
- IntuiLink software plus USB, GPIB and LAN interfaces included
- Option 001 provides multiple-unit link for synchronous channels
- LXI Class C Compliant
Bruel & Kjaer 2713
Bruel & Kjær Power Amplifier type 2713
- 100 V (RMS), 1 A into capacitive load
- Frequency range 10 Hz to 200 kHz
- 0 to 60 dB voltage gain in six 10 dB ranges
- Switchable maximum output voltage limits
- Circuit protection against overload
Axodyn BBC Amplifier
Axodyn BBC Amplifier
